3362533 - 1088C10 water pump - r + r

Removing ( Refitting ) Place the vehicle on a ramp. - 1016A10  sound-proofing cover - r + r - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.

NameConnector
-Battery  A1 
 - 4450B10  Front WHEEL (one) - R.R. (Right side).  - 7055B54  under-engine guard - r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (Right side). 1. Disconnect the lower coolant inlet hose from the radiator, radiator side.
Compress the clips by hand and withdraw the quick-release fitting to disconnect the sleeve.
Collect the coolant in a suitable container.
 - 1080B94  front lambda probe with catalitic converter r rUndo the fixing bolts and move aside the heat shield on the exhaust manifold. - 1092B50  alternator/air conditioner compressor drive belt - adjust tension1. Undo the top fixing bolt.2. Slacken the bottom fixing bolt.3. Rotate the alternator downwards to gain access to the water pump fastenings.
1. Undo the bolts fixing the rigid coolant inlet pipe to the water pump, water pump side.2. Undo the bolts (2a) and remove the water pump (2b) complete with support.
Refitting ( Removing ) Place the water pump back in its housing and fix it tightening the bolts to the recommended torque.

FasteningComponentØValue(daNm)
-BoltCOOLANT PUMPM8(Engine crankcase side) 2.1 - 2.6
Tighten the bolts fixing the rigid coolant inlet pipe to the water pump, water pump side, to the recommended torque.

FasteningComponentØValue(daNm)
-BoltCOOLANT PUMPM8(Engine pump side) 2,1 - 2,6
Place the alternator back in its housing and secure it using the bolts. - 1092B50  alternator/air conditioner compressor drive belt - adjust tension - 1092B54  alternator/water pump drive belt - adjust tensionPosition the exhaust manifold heat shield and secure it by tightening the fixing bolts. - 1080B94  front lambda probe with catalitic converter r rConnect the lower coolant outlet hose from the radiator, radiator side. - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (Right side).  - 7055B54  under-engine guard - r r - 4450B10  Front WHEEL (one) - R.R. (Right side). Connect the battery's negative terminal.

NameConnector
-Battery  A1 
 - 5530B56  BATTERY DRIP TRAY COVER - R.R. - 1016A10  sound-proofing cover - r + rRemove the car from the ramp.Fill the cooling system with coolant.