3362553 - 1032D34 timing system guard assemblies - r + r

Removing ( Refitting ) Place the vehicle on a ramp. - 1016A10  sound-proofing cover - r + r - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.

NameConnector
-Battery  A1 
 - 7055B54  under-engine guard - r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 4450B10  Front WHEEL (one) - R.R. - 1092B50  alternator/air conditioner compressor drive belt - adjust tension- 5510C10 ignition coil/s - r+r  - 1008B10  power unit front mount (timing side) flexible block - replace - 1008A46  cam shaft left rigid mount - r r - 1032D12  timing system protective cover(s) - r + r - 1092A10  Crankshaft services PULLEY - R.R. - 1056B82  injection/ignition system e.c.u. (one) - r + r - 1056B87  ignition/injection system control unit mount - r r - 1036G49  rear camshaft seal, lh or rh - r r with mount and coil/s removed - 1032B10  toothed timing belt - r + r for timing adjustment or replacement - 1032B40  toothed-driven pulley (one) - r + r with timing belt removed1. Undo the bolts (1a) and remove the upper rear timing gear cover (1b).
1. Undo the bolts (1a) and remove the lower rear timing gear cover (1b).
Refitting ( Removing ) Refit the lower rear engine flywheel protection in its seating and fix it using the bolts.Refit the upper rear engine flywheel protection in its seating and fix it using the bolts. - 1032B40  toothed-driven pulley (one) - r + r with timing belt removed - 1032B10  toothed timing belt - r + r for timing adjustment or replacement - 1036G49  rear camshaft seal, lh or rh - r r with mount and coil/s removed - 1056B87  ignition/injection system control unit mount - r r - 1056B82  injection/ignition system e.c.u. (one) - r + r - 1092A10  Crankshaft services PULLEY - R.R. - 1032D12  timing system protective cover(s) - r + r - 1008A46  cam shaft left rigid mount - r r - 1008B10  power unit front mount (timing side) flexible block - replace- 5510C10 ignition coil/s - r+r  - 1092B50  alternator/air conditioner compressor drive belt - adjust tension - 1092B54  alternator/water pump drive belt - adjust tension - 4450B10  Front WHEEL (one) - R.R. - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7055B54  under-engine guard - r rDisconnect the battery negative terminal.

NameConnector
-Battery  A1 
 - 5530B56  BATTERY DRIP TRAY COVER - R.R. - 1016A10  sound-proofing cover - r + rRemove the car from the ramp.