1088D23 SLEEVE FROM THERMOSTAT TO RIGID PIPE CARRYING FLUID TO PUMP - R R - Fiat - STILO - eLearn

3362580 - 1088D23 sleeve from thermostat to rigid pipe carrying fluid to pump - r r

) Place the vehicle on a ramp. - 7055B54 under-engine guard - r r - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.1. Disconnect the lower coolant inlet hose from the radiator, radiator side.

To disconnect the hose, press the clips manually and remove the rapid attachment.

Collect the coolant in a suitable container.

- 1048A32 sleeve from air cleaner to intake manifold - r + r1. Undo the bolt (1a) and move the wiring mounting bracket (1b).2. Loosen the bands (2a) and remove the hose from the thermostat to the pump rigid inlet pipe (2b).

Refitting ( Removing

) Place the hose from the thermostat to the pump rigid inlet pipe back in its housing and secure it using the bands.Place the wiring mounting bracket back in its housing and secure it using the bolt. - 1048A32 sleeve from air cleaner to intake manifold - r + rConnect the lower coolant outlet hose from the radiator, radiator side. - 0010T20 coolant change - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7055B54 under-engine guard - r rRemove the car from the ramp.