3362490 - 1076B20 rear exhaust silencer - r + r
Removing
(
Refitting
)
Place the car on a ramp.Raise the lift.1. Loosen the collar securing the rear exhaust silencer to the rigid
section.2. Undo the bolt securing the flexible support to the bodyshell.3. Remove the rear exhaust silencer.
Refitting
(
Removing
)
Fit the rear exhaust silencer, tighten
the bolt securing the rubber block to the bodyshell.Connect the rear silencer to the rigid
pipe and tighten the coupling collar nut to torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | REAR EXHAUST SILENCER | M10 x 1.25 | 5 |