3362817 - 3310A30 FRONT BRAKE CALIPER (one) - R.R.

Removing ( Refitting ) Position the vehicle on the ramp. - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. - 4450B10  Front WHEEL (one) - R.R.1. Use the special tool to unscrew the brake pipe connector.

NameCountry
-Box wrench for brake fittings1.856.132.000
Release the brake pipe rubber retainer from its seat.1. Disconnect the electrical connection for the brake pad wear sensor (only on left side).

NameConnector
1Left brake pad wear sensor (switch)  K20 
2. Unscrew the brake caliper retaining bolts.3. Remove the brake caliper.
Refitting ( Removing ) Fit the brake caliper.Tighten the brake caliper bolts to torque.

FasteningComponentØValue(daNm)
-----
Connect the electrical connection for the brake pad wear sensor (only on the left side)

NameConnector
-Left brake pad wear sensor (switch)  K20 
Secure the brake pipe rubber retainer in its seat.Use the special tool to tighten the brake pipe connection to torque.

NameCountry
-Box wrench for brake fittings1.856.132.000

FasteningComponentØValue(daNm)
--HOSE TO REAR BRAKE CALIPERM101.4
 - 0010T64  brake and or clutch fluid check level and top up as necessary - 0010T65  hydraulic brake system bleed air - 4450B10  Front WHEEL (one) - R.R.Connect the battery negative terminal. - 5530B56  BATTERY DRIP TRAY COVER - R.R.