3363420 - 7045A90 Front seat CUSHION UPHOLSTERY, left or right - R.R. with seat removed

Removing ( Refitting )  - 7045A24  squab knob - r r - 7045A52  squab rake adjustment device outer guard one lh or rh r r - 7045A54  squab rake adjustment device inner guard one lh or rh r r - 7045A44  seat interior guard - r r - 7045A43  seat exterior guard - r rFold the front seat over so that the bolts fixing the side cover are accessible.1. Undo the front (1a) and lower (1b) fixing bolts.2. Release the outer side cover and remove it from the housing. Carry out the operations describe below to remove the inner cover. - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. - 7045A10  l/h or r/h front seat (one) - r+rFold the front seat over so that the bolts fixing the side cover are accessible.1. Undo the front (1a) and side (1b) fixing bolts.2. Release the inner side cover and remove it from the housing. Fold the front seat over so that the bolts fixing the glove compartment support are accessible.1. Undo the front (1a) and rear (1b) fixing bolts.2. Release the electrical wiring (2a) from the retaining springs (2b) on the glove compartment support. 1. Release the glove compartment support and remove it from the housing.  - 7045D21  Front seat CUSHION COVER, left or right - R.R. with seat removed1. Release the cushion upholstery from the housing. Carry out the operations described below for front seats equipped with passenger presence sensors.1. Release the electrical connector for the passenger sensor from the contact holder support. Release the electrical wiring for the passenger sensor from the retaining bands on the cushion frame.1. Keep the passenger sensor electrical wiring and remove the cushion upholstery from the housing. 1. Separate the passenger sensor from the cushion upholstery. Refitting ( Removing ) Check that the upholstery is not damaged.Fit the upholstery in the cushion frame housing.Carry out the operations described below for front seats equipped with passenger presence sensors.Fit new double-sided tape on the passenger sensor.Fasten the passenger sensor to the cushion upholstery.Reposition the electrical wiring for the passenger sensor and secure it to the cushion frame using new retaining bands.Secure the passenger sensor electrical connector to the contact holder support. - 7045D21  Front seat CUSHION COVER, left or right - R.R. with seat removedFit the glove compartment support in place and secure it using the bolts.Carry out the operations described below to fit the inner cover.Fit the inner cover in place and tighten the fixing bolts. - 7045A10  l/h or r/h front seat (one) - r+rConnect the battery negative terminal. - 5530B56  BATTERY DRIP TRAY COVER - R.R.Carry out the operations described below to fit the outer cover.Fit the outer cover in place and tighten the fixing bolts. - 7045A43  seat exterior guard - r r - 7045A44  seat interior guard - r r - 7045A54  squab rake adjustment device inner guard one lh or rh r r - 7045A52  squab rake adjustment device outer guard one lh or rh r r - 7045A24  squab knob - r r