3362653 - 1048B44 RIGID AIR SUPPLY HOSE BETWEEN HEAT EXCHANGER AND MANIFOLD PIPE - R.R.

Removing ( Refitting ) Place the car on a ramp.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.1. Open the band (1a) and release the brake servo vacuum pipe (1b).2. Undo the bolts fixing the rigid pipe to the inlet manifold.
1. Undo the bolts fixing the rigid pipe to the gearbox bell housing.2. Open the band and disconnect the rigid air supply pipe between the heat exchanger and the manifold from the rigid pipe from the air supply hose between the heat exchanger and the rigid pipe.3. Remove the rigid air supply pipe between the heat exchanger and the manifold from the rigid pipe from the engine compartment.
Refitting ( Removing ) Fit the rigid air supply pipe between the heat exchanger and the manifold to the rigid pipe from the air supply hose between the heat exchanger and the rigid pipe.Screw in the bolt fixing the rigid pipe to the bellhousing without tightening it to torque.

FasteningComponentØValue(daNm)
-BoltRIGID PIPE BETWEEN INTERCOOLER/MANIFOLDM10 x 1.25
Tighten the bolts fixing the rigid pipe to the intake manifold.Secure the brake servo vacuum pipe to the band.    7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R