3362504 - 1084A42 ENGINE OIL PRESSURE WARNING LIGHT SWITCH - R + R

Removing ( Refitting ) Position the vehicle on a lift.    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.Raise the lift.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R..1. Disconnect the electrical connections from the engine oil pressure warning light switches.
DescriptionConnector
1Engine oil pressure sensor    K28
DescriptionConnector
1Engine oil temperature sensor    K29
2. Undo and remove the engine oil pressure warning light switches.
Refitting ( Removing ) Position the engine oil pressure warning light switches and tighten them to the recommended torque.
FasteningComponentØ  Value(daNm)
--INSUFFICIENT ENGINE OIL PRESSURE SWITCHM14 X 1.53
Connect the electrical connections from the engine oil pressure warning light switches.
DescriptionConnector
-Engine oil pressure sensor    K28
DescriptionConnector
-Engine oil temperature sensor    K29
    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R..Lower the lift.Connect the negative battery terminal (-).    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Remove the vehicle from the lift.