3362596 - 1056B14 THROTTLE CASE - R + R

Removing ( Refitting )     1016A40 COPERCHIO BOBINE accensione su testa cilindri - S.R.    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the negative battery terminal.    Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R    1048A31 TUBO RIGIDO tra filtro aria e collettore di aspirazione - S.R..1. Disconnect the electrical connection for the integrated throttle casing actuator.

	Description	Connector
1	Integrated throttle casing actuator	N75

2. Undo the bolt (2a) and disconnect the control unit earth lead (2b).3. Undo the bolts (3a) and remove the throttle casing (2b) complete with gasket and control unit support (3c). Refitting ( Removing ) Proceed with the refitting as described below.

When replacing the throttle casing, the control unit learning procedure must be carried out at the end of the fitting operation.    Op. 1056B14 THROTTLE CASE - R + R

Connect the control unit earth lead and tighten the fixing bolt.    1048A31 TUBO RIGIDO tra filtro aria e collettore di aspirazione - S.R.    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+RConnect the negative battery lead.    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.    1016A40 COPERCHIO BOBINE accensione su testa cilindri - S.R..