1040B32 FRONT FUEL DELIVERY LINE - R.R. - Fiat - CROMA - eLearn

194000292 - 1040B32 FRONT FUEL DELIVERY LINE - R.R.

) - Position the vehicle on a lift.1. Remove the sound insulation cover fastened to the engine by three pins.

1. Loosen the band and disconnect the engine oil vapour recovery pipe from the cylinder head cover.2. Loosen the bands and remove the air supply hose from the air flow meter to the throttle casing.

1. Connect the tool to the bleed valve on the fuel supply pipe and discharge the fuel pressure.

Follow the safety instructions and specific recommendations.

Tool	Description	Function	Validity
2000002900	Breather connector	Fuel system pressure drainage	1.82.2

1. Undo the connector (1a), disconnect the front fuel supply pipe (1b), fuel manifold pipe side.

- Release the front fuel supply pipe from the fastenings in the engine compartment. Op. 4450B04 RIGHT FRONT WHEEL - R.R1. Working underneath the vehicle, undo the bolts (1a) and remove the front pipe protection (1b).

1. Undo the bolts and remove the rear pipe protection.2. Undo the bolts (2a) and remove the bracket (2b).

1. Undo the bolts (1a), loosen the bolt (1b) and turn the underbody reinforcement (1c) sideways.

1. Disconnect the rapid connector (1a) and remove the front fuel supply pipe (1b).

Releae the front fuel supply pipe working via the right front wheel arch.

Refitting ( Removing

) - Place the front fuel supply pipe in its housing and connect the rapid connector.1. Place the underbody reinforcement (1a) in its housing and secure it tightening the new bolts (1b) and (1c) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Inner bolt (to replace)	M12	(bodyshell side) 8.1 - 9.9 + 45°

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Outer bolt (to replace)	M10	(bodyshell side) 5.0 - 6.1 + 45°

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Bolt (to be replaced)	M12	(front suspension frame side) 9.0 - 11.0 + 90°

- Fit the bracket in its housing and secure it using the bolts.- Place the rear pipe guard in its housing and secure it using the bolts.- Place the front pipe guard in its housing and secure it using the bolts. Op. 4450B04 RIGHT FRONT WHEEL - R.R- Secure the front fuel supply pipe using the fastenings in the engine compartment.1. Connect the front fuel supply pipe (1a), fuel manifold pipe side and tighten the connector (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front fuel supply pipe	Connector	-	(fuel manifold side) 1.0	2.2

- Place the air supply hose from the air flow meter to the throttle casing back in its housing and secure it using the bands.- Connect the engine oil vapour recovery pipe to the cylinder head cover and secure it using the band.- Place the sound insulation cover back in its housing and secure it to the engine using the three pins.- Remove the vehicle from the lift.