194000452 - 2110D26 DIFFERENTIAL INTERNAL CASING BEARINGS - REPLACE WITH DIFFERENTIAL INTERNAL CASING REMOVED

Removing ( Refitting ) - Place the differential assembly in the press.1. Place the tool (1a) on the differential casing bearing and, using the tool (1b), remove the bearing (1c) and the washer (1d) from the housing on the differential casing.
ToolDescriptionFunctionValidity
1870845000ExtractorExtracting bearing from differential2.2
ToolDescriptionFunctionValidity
1870007000GripGrip for tool for extracting bearing/fitting main shaft oil seal/fitting differential bearing race
- Proceed with the removal of the crown wheel side differential conical bearing, using the same procedure and equipment as described above.
Refitting ( Removing ) 1. Place the differential casing in the press and, using the drift (1a), fit the conical bearing (1b) in the differential casing complete with old washer.
ToolDescriptionFunctionValidity
1860770000Fitting toolFitting differential conical bearings2.2
- Proceed with the refitting of the crown wheel side differential conical bearing, using the same procedure and equipment as described above.