2710A24 DIFFERENTIAL SIDE CONSTANT VELOCITY JOINT (ONE) L/H OR R/H - R + R WITH DRIVE SHAFT REMOVED - INCLUDES BOOT REPLACEMENT - Fiat - CROMA - eLearn

194000464 - 2710A24 DIFFERENTIAL SIDE CONSTANT VELOCITY JOINT (ONE) L/H OR R/H - R + R WITH DRIVE SHAFT REMOVED - INCLUDES BOOT REPLACEMENT

) - Position the driveshaft in a vice fitted with protective jaws.1. Remove the bands securing the protective boot using a suitable tool.

1. Retract the protective boot on the driveshaft.

1. Clean the driveshaft constant velocity joint until the safety ring is accessible.

1. Extend the safety ring using suitable pliers.2. Extract the wheel side constant velocity joint from the driveshaft.

1. Remove the wheel side constant velocity joint safety ring.

1. Remove the protective boot.

Refitting ( Removing

) - Wash the constant velocity joint components thoroughly using diesel oil or petrol and visually inspect that there are no signs of seizing or grooves on the balls or seats.- Fit a new protective boot on the driveshaft.1. Place a new safety ring in the housing on the constant velocity joint.

Check that the safety ring is correctly fitted.

- Place the wheel side constant velocity join in its housing on the driveshaft.

Push the constant velocity joint until the safety ring is correctly positioned.

- Fill the joint and the boot with the specified grease.

Component	Type	Description	Classification	Qty.	Validity
FRONT DRIVESHAFT DIFFERENTIAL SIDE CONSTANT VELOCITY JOINT	Grease (g)	TUTELA MRM ZERO	NLGI 0	110	2.2

Component	Type	Description	Classification	Qty.	Validity
FRONT DRIVESHAFT DIFFERENTIAL SIDE CONSTANT VELOCITY JOINT	Grease (g)	TUTELA MRM ZERO	NLGI 0	120 ± 10	1.8

- Place the boot in position on the constant velocity joint and on the driveshaft.

Check that the boot is correctly positioned on the driveshaft and on the constant velocity joint.

1. Fit two new bands securing the boot using a suitable tool.

- Remove the driveshaft from the vice.