194000674 - 5505A41 STEERING WHEEL CONTROL UNIT DIGITAL NETWORK NODE - R.R.

Before removing and refitting the control unit the following preliminary operations must be carried out.
- Turn the ignition key to the OFF position and extract it.- Disconnect the negative and positive battery terminals and insulate them.- Wait for 10 minutes before continuing.
DescriptionConnector
BATTERY    See A001 BATTERY
FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS    Op. 5580C AIR BAG SYSTEM
Removing ( Refitting )     Op. 5580C18 AIR BAG MODULE - R+R1. Disconnect the electrical connections (1a) for the Connect panel control module (1b) and the radio control module, then disconnect the electrical connections (1c), (1d) and remove the digital network node control unit (1e) from the steering wheel.
DescriptionConnector
1cSINGLE TONE HORN    See P005 SINGLE TONE HORN
DescriptionConnector
1dSTEERING WHEEL NODE CONTROL UNIT (NVO)    See M093 STEERING WHEEL NODE CONTROL UNIT (NVO)
Refitting ( Removing ) - Position the control unit in the housing on the steering wheel.- Connect the electrical connections.
DescriptionConnector
SINGLE TONE HORN    See P005 SINGLE TONE HORN
DescriptionConnector
STEERING WHEEL NODE CONTROL UNIT (NVO)    See M093 STEERING WHEEL NODE CONTROL UNIT (NVO)
    Op. 5580C18 AIR BAG MODULE - R+R- Connect the battery terminals.
DescriptionConnector
BATTERY    See A001 BATTERY