194000675 - 5505A42 CONTROL UNIT (DIGITAL NETWORK NODE) IN DRIVER''S DOOR - R.R.

FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS

Several of the CAN nodes, including the driver''s door node (M 066), are programmed with default settings that the customer will find when they acquire the vehicle. If the driver''s door node (M 066) is replaced, the Fiat Parts Dept. will send a pristine component. once fitted, the data memorized in the Body Computer must be transferred to it by carrying out the "PROXI ALIGNMENT" procedure using the Examiner.

	Description	Connector
	DRIVER''S DOOR JUNCTION UNIT (NPG)	See M066 DRIVER'S DOOR CONTROL UNIT (NPG)

Removing ( Refitting )

Before removing and refitting the control unit the following preliminary operations must be carried out.

- Open the front side door, driver''s side.- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.- Wait for 10 minutes before continuing.

	Description	Connector
	BATTERY	See A001 BATTERY

    Op. 7005E12 CORNER COVER FOR ONE FRONT SIDE DOOR, LH OR RH - R.R.    Op. 7005E14 TOP COVER OF FRONT SIDE DOOR INNER PANEL - R R OR REPLACE    Op. 7005M14 SWITCH UNIT ON DRIVER'S FRONT DOOR - R.R.    Op. 7005E10 FRONT SIDE DOOR INTERIOR PANEL - R.R.    Op. 5505A43 CONTROL UNIT (DIGITAL NETWORK NODE) IN DRIVER'S DOOR - R.R. WITH PANEL REMOVED Refitting ( Removing ) - Check that the control unit is not damaged.

Each time the (NPG) control unit is refitted, the initialization procedure must be carried out for the electric windows and the anti-crush safety device. The initialization of the anti-crush safety system is designed for the (NPG) control unit to learn the window position parameters along the entire travel.

To initialize the anti-crush safety system, proceed as follows:- place the window in the lower end of travel position (manually or automatically);- position the window in the upper end of travel position manually (without interruptions) using the UP button and once this position is reached keep the UP button acitvated for at least 1 second.After having initialized the system the (NPG) control unit will allow both the automatic upwards movement of the window and the central opening/closing.    Op. 5505A43 CONTROL UNIT (DIGITAL NETWORK NODE) IN DRIVER'S DOOR - R.R. WITH PANEL REMOVED    Op. 7005E10 FRONT SIDE DOOR INTERIOR PANEL - R.R.    Op. 7005M14 SWITCH UNIT ON DRIVER'S FRONT DOOR - R.R.    Op. 7005E14 TOP COVER OF FRONT SIDE DOOR INNER PANEL - R R OR REPLACE    Op. 7005E12 CORNER COVER FOR ONE FRONT SIDE DOOR, LH OR RH - R.R.- Connect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY