194002329 - 2130B48 GEAR SELECTOR ON AUTOMATIC TRANSMISSION - R R (AUTOMATIC TRANSMISSION)

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R1. Disconnect the gear selection cable from the gear selector and reaction bracket.2. Disconnect the electrical connection from the gear selector on the automatic transmission.

	Description	Connector
2	Automatic transmission solenoid valves	See L050 AUTOMATIC TRANSMISSION SOLENOID VALVES

3. Undo nut (3a) and remove lever (3b) from the gear selector on the automatic transmission. 1. Open the retaining tabs (1a) and unscrew nut (1b) securing the speed selector to the selection pin.2. Undo bolts (2a) and remove the gear selector on the automatic transmission (2b). Refitting ( Removing ) 1. Place the gear selector on the automatic transmission (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

Position the gear selector so that the facets (1c) are parallel to notches (1d) and reference line (1e).

Component	Fastening	dia	Value (daNm)	Validity
Automatic transmission gear selector	Bolt	M8	(automatic gearbox side) 2.5	2.2 CAE

2. Tighten nut (2a) securing the gear selector to the selection pin and secure with the tabs (2b).

Component	Fastening	dia	Value (daNm)	Validity
Automatic transmission gear selector	Nut	-	(selection pin side) 1.4 - 1.8	2.2 CAE

1. Position the lever (1a) in its housing on the gear selector and secure it by tightening the nuts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Automatic transmission gear selector lever	Nut	M8	(gear selector side) 1.7	2.2 CAE

2. Connect the electrical connection to the gear selector on the automatic transmission.3. Connect the gear selection cable to the gear selector and reaction bracket.     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R