194002426 - H011 STEERING HARD / (IN ONE DIRECTION ONLY)

When the steering is operated normally there is a hardening of the steering action to the right or the left
0PRELIMINARY CHECKSALL OKPROBLEMS ENCOUNTEREDACTION
Carry out a test steering fully in various conditions to check the actual onset of the hardening in one direction only.Visually inspect the power assisted steering fluid level in the reservoir.Move on to Step 1Power assisted steering fluid level too lowAdd fluid and, in the case of leaks, identify them and eliminate them.
1STEERING RODS AND ARMS CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the condition of the steering rods and armsMove on to Step 21.Rods damaged or worn1.Replace rods or ball joints    Op. 4110B10 STEERING LINKS - R+R ON VEHICLE - CHECK TOE-IN/TOE-OUT SEPARATELY
2.Arms damaged or worn2.Replace the steering box    Op. 4110A10 STEERING WHEEL - R+R FOR REPLACEMENT OR CHECKS
2CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Connect using the Examiner and check that there are no errors by steering to the end of travel positionEnd of diagnosisErrors presentProceed as instructed in the    See table H010 STEERING HARD / (STEERING IN BOTH DIRECTIONS)