194000013 - 2710A32 INTERMEDIATE DRIVESHAFT BEARING SUPPORT - R + R WITH INTERMEDIATE DRIVESHAFT REMOVED
Removing
(
Refitting
)
1. Undo the bolts (1a) and remove the intermediate driveshaft bearing support (1b).
Refitting
(
Removing
)
- Place the intermediate driveshaft bearing support in position and secure it tightening the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Intermediate driveshaft bearing support | Bolt | M10 | (engine crankcase side) 4.5 - 5.5 | 2.2 |