1004D40 ENGINE - POSITION ON STAND AND REMOVE - Fiat - CROMA - eLearn

194000229 - 1004D40 ENGINE - POSITION ON STAND AND REMOVE

) 1. With the flywheel lock (1a) fitted, undo the bolts (1b) and remove the flywheel (1c).

Tool	Description	Function	Validity
1860846000	Counter-torque	Flywheel lock

The bolts fixing the flywheel are pre-treated with sealant, therefore they should be replaced each time they are removed.

1. Remove the manual gearbox centering bushes from the engine block.2. Fit the tool on the engine block.

Tool	Description	Function	Validity
1871000000	Bracket	Positioning engine on overhaul stand

3. Apply suitable chains to the engine and support it using a suitable hydraulic hoist.4. Place the engine (4a) on the overhaul stand (4b) using the tool fitted previously.

Tool	Description	Function	Validity
1871000000	Overhaul stand	Engine support for overhauling

Refitting ( Removing

) - Remove the engine from the overhaul stand.

Tool	Description	Function	Validity
1871000000	Overhaul stand	Engine support for overhauling

- Remove the harness and the hydraulic hoist supporting the engine.- Remove the tool from the engine block.

Tool	Description	Function	Validity
1871000000	Bracket	Positioning engine on overhaul stand

- Place the manual gearbox centering bushes on the engine block.1. Place the flywheel (1a) in its housing and secure it tightening the new bolts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Engine flywheel	Bolt (to be replaced)	-	(engine crankshaft side) 6.0 + 30° + 15°	2.2