194000236 - 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE
Removing
(
Refitting
)
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.- Position a hydraulic jack underneath the engine.1. Undo the bolts (1a), (1b) and the nut (1c) and remove the flexible mounting for the timing side power unit front support (1d).
Refitting
(
Removing
)
1. Place the timing power unit front support flexible mounting (1a) in its housing and secure it tightening the bolts (1b) and (1c) and the nut (1d) to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing side power unit rigid support flexible mounting | Bolt | M10 | (rigid support side) 5.0 - 6.0 | 1.82.21.9 JTD 16v1.9 JTD 8v |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing side power unit rigid support flexible mounting | Bolt | M10 | (bodyshell side) 5.0 - 6.0 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing side power unit rigid support flexible mounting | Nut | M10 | (bodyshell side) 5.0 - 6.0 |
