194000293 - 1040B34 INTERMEDIATE FUEL DELIVERY HOSE - R.R.

Removing ( Refitting ) 1. Connect the tool to the bleed valve on the fuel supply pipe and discharge the fuel pressure.

Follow the safety instructions and specific recommendations.

Tool	Description	Function	Validity
2000002900	Breather connector	Fuel system pressure drainage	1.82.2

1. Working from beneath the vehicle, undo the bolts (1a) and remove the front pipe protection (1b). 1. Unscrew the bolts and remove the rear pipe protection.2. Undo the bolts (2a) and remove the bracket (2b). 1. Unscrew bolts (1a), loosen bolt (1b) and turn the underbody reinforcement (1c) to the side. 1. Disconnect the rapid connector for the intermediate fuel supply pipe, front fuel supply pipe side. 1. Disconnect the rapid connector for the intermediate fuel supply pipe, rear fuel supply pipe side. 1. Remove the intermediate fuel delivery pipe after releasing from the underbody fastenings. Refitting ( Removing ) - Refit the intermediate fuel delivery pipe and secure to the underbody with clips.- Connect the rapid connector for the intermediate fuel supply pipe, rear fuel supply pipe side.- Connect the rapid connector for the intermediate fuel supply pipe, front fuel supply pipe side.1. Place the underbody reinformcement (1a) in its housing and secure it tightening the new bolts (1b) and (1c) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Inner bolt (to replace)	M12	(bodyshell side) 8.1 - 9.9 + 45°

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Outer bolt (to replace)	M10	(bodyshell side) 5.0 - 6.1 + 45°

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Bolt (to be replaced)	M12	(front suspension frame side) 9.0 - 11.0 + 90°

- Fit the bracket in its housing and secure it using the bolts.- Place the rear pipe protection in its housing and secure it using the bolts.- Place the front pipe protection in its housing and secure it using the bolts.