1. Remove the sound insulation cover fastened to the engine by three pins.
1. Loosen the band and disconnect the engine oil vapour recovery pipe from the cylinder head cover.2. Loosen the bands and remove the air supply hose from the air flow meter to the throttle casing.
1. Disconnect the electrical connection from the air flow meter.
2. Undo the bolts (2a) and remove the air filter cover (2b), complete with air flow meter (2c).3. Remove the air cleaner filter element.
1. Release the fuel vapour pipe (1a) from the band (1b) on the air filter casing.
1. Disconnect the cold air intake from the air filter casing.2. Remove the air filter casing fastened to the bodyshell by three pins.
Refitting
(
Removing
)
- Place the air filter casing in its housing and secure it to the bodyshell using the three pins.- Connect the cold air intake to the air filter casing.- Fasten the fuel vapour pipe to the air filter casing using the band.- Fit the air filter filter element in place.- Fit the cover for the air filter, complete with air flow meter, and secure it using the bolts.- Connect the electrical connection to the air flow meter.- Place the air supply hose from the air flow meter to the throttle casing back in its housing and secure it using the bands.- Connect the engine oil vapour recovery pipe to the cylinder head cover and secure it using the band.- Place the sound insulation cover back in its housing and secure it to the engine using the three pins.- Connect the negative battery terminal.
Removing
(
Refitting
)
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
