1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R - Fiat - CROMA - eLearn

194000374 - 1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R

) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

1. Remove the sound insulation cover fastened to the engine by three pins.

1. Loosen the band and disconnect the engine oil vapour recovery pipe from the cylinder head cover.2. Loosen the bands and remove the air supply hose from the air flow meter to the throttle casing.

1. Disconnect the rapid connector for the inlet fuel vapour flow enablement solenoid valve pipe, fuel vapour centre pipe side.

1. Disconnect the rapid connector for the inlet fuel vapour flow enablement solenoid valve pipe, air chamber side.

1. Disconnect the electrical connection from the inlet fuel vapour flow enablement solenoid valve.

	Description	Connector
1	Fuel vapour recovery solenoid valve	See L010 FUEL VAPOUR RECOVERY SOLENOID VALVE

2. Release the inlet fuel vapour flow enablement solenoid valve from the fastening, then remove it complete with pipes.

Refitting ( Removing

) - Place the inlet fuel vapour flow enablement solenoid valve complete with pipes in its housing and secure it.- Connect the electrical connection to the inlet fuel vapour flow enablement solenoid valve.- Connect the rapid connector for the inlet fuel vapour flow enablement solenoid valve pipe, air chamber side.- Connect the rapid connector for the inlet fuel vapour flow enablement solenoid valve pipe, fuel vapour centre pipe side.- Connect the engine oil vapour recovery pipe to the cylinder head cover and secure it using the band.- Place the sound insulation cover back in its housing and secure it to the engine using the three pins.- Connect the negative battery terminal.