194000387 - 1084B45 TIMING CHAIN LUBRICATION NOZZLE - R.R

Removing ( Refitting ) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 4450B04 RIGHT FRONT WHEEL - R.R    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE1. Undo bolt (1a) and remove timing chain lubrication nozzle (1b). Refitting ( Removing ) - Position the timing chain lubrication nozzle in its housing and secure it tightening the bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing chain lubrication jet	Bolt	M6 x 1	(engine crankcase side) 1.0	2.2

    Op. 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 4450B04 RIGHT FRONT WHEEL - R.R- Connect the negative battery terminal.    Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY- Remove the vehicle from the lift.