194000457 - 2125C30 GEAR ENGAGEMENT/SELECTION CABLES - R.R
Removing ( Refitting ) Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.(Both). Op. 7040A44 LEFT DASHBOARD SIDE TRIM - R.R. Op. 5010C57 LEFT LOWER AIR DIFFUSER - R R Op. 7040A26 STEERING COLUMN TRIM - R+R Op. 7040A30 LEFT LOWER DASHBOARD TRIM - R.R. Op. 5580C23 DRIVE SIDE KNEE PROTECTION AIR BAG MODULE R. R.Follow all the recommended safety instructions (see 5580C - Precautions). |
1. Undo the bolt fixing the gear selector-engagement rods mounting bracket.2. Disconnect the gear selection and engagement flexible rods from the gearbox.
- Remove the gear selection and engagement flexible rods releasing them towards the engine compartment.
1. Working at the bench, remove the retaining clips (1a) and separate the flexible gear selection and engagement rods (1b) from the mounting bracket (1c).
Refitting
(
Removing
)
- Assemble the flexible gear selection and engagement rods with the mounting bracket and secure them using the retaining clips.- Place the flexible gear selection and engagement rods in their housings introducing them from the engine compartment towards the passenger compartment.
Check that the rod support diaphragm is correctly housed in the engine compartment bulkhead and that the arrow stamped on it is pointing upwards. |
Make sure that the gear lever is in neutral. |