194000533 - 4130B32 POWER STEERING PUMP SUPPORT - R R

Removing ( Refitting ) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 4450B04 RIGHT FRONT WHEEL - R.R    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.    Op. 4130B25 POWER STEERING PUMP ASSEMBLY R R FOR VERSIONS WITH AIR CONDITIONER1. Undo the bolts fixing the power steering pump mount to the bodyshell.2. Undo the bolt securing the power steering pump mount to the front suspension frame.3. Working from the wheel arch, remove the power steering pump mount. Refitting ( Removing ) 1. Place the power steering pump mount (1a) in its housing and secure it tightening the bolts (1b) and (1c) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Power steering electric pump mounting	Bolt	M8	(bodyshell side) 1.8 - 2.6	2.2

Component	Fastening	dia	Value (daNm)	Validity
Front suspension frame	Front-rear bolts (to replace)	M12	(bodyshell side) 9.0 - 11.0 + 90°

    Op. 4130B25 POWER STEERING PUMP ASSEMBLY R R FOR VERSIONS WITH AIR CONDITIONER    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 4450B04 RIGHT FRONT WHEEL - R.R- Connect the negative battery terminal.    Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY    Op. 0010T75 HYDRAULIC POWER STEERING SYSTEM BLEED AIR- Remove the vehicle from the lift.