194002186 - 1080A12 IDLING CO LEVEL - CHECK USING SPECIAL EQUIPMENT AND ADJUST SPEED

Carry out the measurement with all the emission control devices acitive and at the specified idle speed.

- Allow the engine to warm up.- Insert the probe of an exhaust gas analyser into the end of the exhaust pipe by not less than 30 cm.

If the shape of the exhaust tailpipe will not allow the probe to be fully introduced, add an extension that ensures a seal in the joint area.

- Wait for the exhaust gas tester indices to stabilise.- With the engine idling, check that the CO2 level is within specified limits.

Measurement	Value	Validity
CO2 emisssions (in accordance with directive 1999/100/CE) [g/km]	204	2.2

Measurement	Value	Validity
CO2 emisssions (in accordance with directive 1999/100/CE) [g/km]	229	2.2 CAE