194002340 - 2135B72 ELECTRONIC AUTOMATIC TRANSMISSION INPUT RPM SENSOR - R R (AUTOMATIC TRANSMISSION)

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R1. Disconnect the gear selector cable from the gear selector and from the bracket. 1. Disconnect the electrical connection from the electronic automatic transmission input rpm sensor.

	Description	Connector
1	Automatic transmission solenoid valves	See L050 AUTOMATIC TRANSMISSION SOLENOID VALVES

2. Undo the bolt (2a) and remove the electronic automatic transmission input rpm sensor (2b). Refitting ( Removing ) - Place the electronic automatic transmission input rpm sensor back in its housing and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Automatic gearbox input speed sensor	Bolt	M6	(automatic gearbox side) 0.6	2.2 CAE

- Connect the electrical connection to the electronic automatic transmission input rpm sensor.- Connect the gear selector cable to the gear selector and to the bracket.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R