194000378 - 1080C24 E.G.R. SYSTEM SOLENOID - R + R

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 1060G50 THROTTLE BODY - R.R1. Loosen the collar (1a) and disconnect the exhaust gas outlet hose from the exhaust gas/water heat exchanger for the E.G.R. system (1b), heat exchanger side.2. Disconnect the electrical connection from the EGR system solenoid valve
DescriptionConnector
2EGR solenoid valve    See L030 EGR SOLENOID VALVE
3. Undo the fixing bolts (3a) and remove the E.G.R. system solenoid valve (3b) complete with hose.- Remove the gasket.
Refitting ( Removing ) - Place the gasket back in its housing.- Place the E.G.R. system solenoid valve in its housing complete with hose and fasten it tightening the bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
E.G.R. system solenoid valveBoltM8(intake manifold side) 2.3 - 2.81.9 JTD 8v
- Connect the electrical connection for the E.G.R. solenoid valve.- Connect the exhaust gas outlet hose from the exhaust gas/water heat exchanger for the E.G.R. system, heat exchanger side and tighten the collar.    Op. 1060G50 THROTTLE BODY - R.R    Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R