194000740 - 5540B44 DIPPED BEAM FOR ONE GAS DISCHARGE LIGHTING UNIT ONE LH OR RH R R

Removing ( Refitting )     Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R RRight side:    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.Proceed as follows for both lamps:1. Undo the protective cover and remove it.
1. Disconnect the connector.2. Release the retaining springs.3. Extract the bulb.
DescriptionConnector
1LEFT HEADLAMP    See F010 LEFT HEADLAMP
DescriptionConnector
1RIGHT HEADLAMP    See F011 RIGHT HEADLAMP
Refitting ( Removing )
When handling the gas discharge bulb, only touch the metal part.
If the glass bulb comes into contat with your fingers, clean it thoroughly with a clean cloth soaked in alcohol and leave it to dry before refitting it.
- Position the bulb and attach the retaining clips.- Connect the electrical connection.
DescriptionConnector
LEFT HEADLAMP    See F010 LEFT HEADLAMP
DescriptionConnector
RIGHT HEADLAMP    See F011 RIGHT HEADLAMP
- Place the cover in position and tighten it to close.If the operation has been carried out on the right side of the vehicle:    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.Proceed as follows for both sides:    Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R