| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Connect the Examiner equipment to the diagnostic socket.Check that there are no faults in the instrument panel | Move on to Step 2 | Presence of errors | Continue following the instructions for the diagnostic equipment |
| 2 | ELECTRICAL CIRCUIT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check:- Connections between right steering column switch unit lever and instrument panel
- Connections between right steering column switch unit lever and earth
See E4010 INSTRUMENT PANEL | Move on to Step 3 | Connections defective, earth or power suply defective | Restore the correct connections, if necessary, replace the wiring. |
| 3 | STEERING COLUMN SWITCH UNIT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the TRIP button the right steering column switch unit lever is working properly See E4010 INSTRUMENT PANEL | Move on to Step 4 | Right lever defective | Replace the steering column switch unit Op. 5550A10 STALK UNIT ASSEMBLY - R+R |
| 4 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | End of diagnosis | | |
