194001968 - D073 CRUISE CONTROL DOES NOT GO OFF WHEN THE CLUTCH PEDAL IS PRESSED

1	CLUTCH SWITCH CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the clutch pedal switch is working properly	Move on to Step 2	No continuity	Replace the clutch pedal switch    Op. 1056B78 SWITCH ON CLUTCH PEDAL - R.R (PETROL ENGINES)(for petrol engines).
				Replace the pedal switch    Op. 1060G42 SWITCH ON CLUTCH PEDAL - R.R. (JTD ENGINES)(forJTD engines).
2	ENGINE MANAGEMENT CONTROL UNIT CONNECTIONS CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	With the ignition key in the ON position and the clutch pedal pressed, check for an earth signal at the engine management control unit coming from the clutch switch:    See E5060 CRUISE CONTROL	Move on to Step 3	Signal interrupted	Repair the connections:    See E5060 CRUISE CONTROL
3	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present by carrying out    See Test 5580AE CRUISE CONTROL OPERATION ROAD TEST	End of diagnosis	The fault persists: engine control unit defective	Replace the engine management control unit    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R