194002482 - K052 VEHICLE PROTECTION WARNING LIGHT ON (ENGINE DOES NOT START)

N.B: The Code warning light is controlled by the Body Computer Node.

1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment to the Teg Reader Node and check, with the key inserted in the key recognition device, for the presence of any errors	Move on to Step 2	Presence of errors	Continue following the instructions for the diagnostic equipment
2	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment to the Body Computer Node and check for the presence of any errors	Move on to Step 3	Presence of errors	Continue following the instructions for the diagnostic equipment
3	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment to the Engine Management Node and check for the presence of any errors	Move on to Step 4	Presence of errors	Continue following the instructions for the diagnostic equipment
4	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment to the steering lock node and check for the presence of any errors	Move on to Step 5	Presence of errors	Continue following the instructions for the diagnostic equipment
5	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment and check the operation of the Code warning light in active diganosis at the Instrument Panel Node	Move on to Step 6	Code warning light not flashing	Replace the instrument panel    Op. 5560B10 CONTROL PANEL - R+R
6	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present	End of diagnosis