194002503 - K104 DISPLAY DOES NOT SHOW HEADLAMP ALIGNMENT DATA

When the selector which controls the headlamp alignment is operated (with the dipped headlamps on) the information on the display does not change.

1	HEADLAMP ALIGNMENT ELECTRICAL CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check: connection between left control panel and NQS; left control panel earth connection between dashboard control unit and instrument panel     See E3080 HEADLAMP AGLINMENT CORRECTOR	Move on to Step 2	1. Connections not correct	1. Repair the connections    See E3080 HEADLAMP AGLINMENT CORRECTOR
			2. Earths defective	2. Repair the earth contacts    See E3080 HEADLAMP AGLINMENT CORRECTOR
2	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check in active diagnosis at the instrument panel that all the display segments are working properly	Move on to Step 3	One or more segments not working	Replace the instrument panel    Op. 5560B10 CONTROL PANEL - R+R
3	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present	End of diagnosis