| 1 | CHECK ERRORS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check for the presence of one or more of the following errors using the Examiner in Instrument Panel Node mode: | Move on to Step 2 | 1. Check "no additional information" and/or "BUS off" | 1. Continue as instructed by the diagnostic equipment |
| 2. EEPROM memory fault | 2. Replace the instrument panel Op. 5560B10 CONTROL PANEL - R+R |
| 2 | ACTIVE DIAGNOSIS CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Use the Examiner to check that the Autotest function has been correctly activated in Active Diagnosis mode | Move on to Step 3 | The relevant function is not controlled by Active Diagnosis | Replace the instrument panel Op. 5560B10 CONTROL PANEL - R+R |
| 3 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | End of diagnosis | | |