| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Using an Examiner check, in Instrument Panel mode, that there are no errors and that the parameters are present. | Move on to Step 2 | 1. System fault | 1. Move on to Step 2 |
| 2. Presence of errors | 2. Continue as described by the diagnostic equipment |
| 2 | ACTIVE DIAGNOSIS CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| With the Examiner in Air Bag Node mode check that the seat belt unfastened warning light is correctly activated in Active Diagnosis. | Move on to Step 3 | The seat belt unfastened warning light does not flash | Replace the Instrument Panel Op. 5560B10 CONTROL PANEL - R+R |
| 3 | CHECK THE SEAT BELT SWITCH | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the seat belt switch is working properly | Move on to Step 4 | Seat belt fastened switch defective. | Replace the belt attachment with switch Op. 7065A24 ANCHORAGE LINK WITH PRETENSIONER FOR ONE FRONT SEAT BELT LH OR RH R R |
| 4 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Using the Examiner check, in Air Bag Node mode, that there are no errors and that the parameters are present. | Move on to Step 5 | Fault persists | Replace the Air Bag control unit Op. 5580C14 AIR BAG ECU - R+R |
| 5 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | End of diagnosis | | |
