194002848 - Y006 P0110 - DEBIMETER AIR TEMPERATURE SIGNAL

The diagnostic equipment signals: Error P0110 (Air flow meter temperature signal)

This error is detected if the junction unit inlet voltage (Pin 53) is greater than 4.95 V (positive short circuit) (detail "Beyond the upper limit" or less than 0.05 V (short circuit to earth or break in the circuit) (detail "Below the lower limit"). In this case the junction unit replacement value is 40 °C.

1	SUPERCHARGING TEMPERATURE SENSOR CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the supercharging temperature sensor is working properly, following the instructions in the    See Test 1064BD SUPERCHARGING TEMPERATURE CHECK	End of diagnosis