194002857 - Y016 P0120 - ACCELERATOR 1 PEDAL SIGNAL

The diagnostic equipment signals: Error P0120 (Accelerator pedal sensor 1).

This error is detected if, with fault code P0641 not recognized, the junction unit input voltage (Pin 9) is more than 4.67 V (positive short circuit) or less than 0.15 V (short circuit to earth or break in the circuit). As a result, the accelerator pedal does not work.

0	PRELIMINARY CHECKS	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment and select the Bosch EDC 16C39 electronic control unit, checking that none of the following errors are present:P0651 - Sensor power supply 2	Move on to Step 1	Error P0651 present	Proceed as instructed in theSee Test 1060GN CHECK ON ENGINE MANAGEMENT CONTROL UNIT SENSOR CONNECTIONS 2
1	ACCELERATOR PEDAL CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the accelerator pedal is working properly    See Test 1068AC ACCELERATOR PEDAL CHECKS	End of diagnosis