194002915 - Y075 P2080 - TEMPERATURE SENSOR ON CATALYTIC PRECONVERTOR OUTLET

The diagnostic equipment signals: Error P2081 (temp. sensor at catalytic preconverter outlet).

This error is detected if voltage at Pin 34 of the electronic control module is greater than 2.23 V (short circuit to positive) (detail "short circuit to +Vbatt or open circuit") or less than 0.66 V (short circuit to earth or break in the circuit) (detail "short circuit to earth"). The control unit takes 200 °C as the replacement value.

1	Check on operation of temperature sensor at catalytic preconverter outlet	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the temperature sensor at the catalytic preconverter outlet is working properly, by carrying out the test    See Test 1080BG CHECK ON OPERATION OF PRE CATALYTIC CONVERTER OUTPUT TEMPERATURE SENSOR	End of diagnosis