194002938 - Y098 U1711 - CAN NETWORK (NCM - NCA) (AUTOMATIC TRANSMISSION)

The diagnostic equipment signals: Error U1711 (CAN (NCM – NCA)).
This error is detected if the control module detects a fault in the automatic transmission system.
0Preliminary checksALL OKPROBLEMS ENCOUNTEREDACTION
Check that there are no other errors in the engine management and automatic transmission systems using the diagnostic equipmentMove on to Step 1There are also other errors presentContinue according to the instructions for the diagnostic equipment for the errors present
1Error deletionALL OKPROBLEMS ENCOUNTEREDACTION
Turn the ignition key to the OFF position.Wait for at least 10 secs.Delete the errrors and carry out a road test, trying to reproduce the conditions that caused the error.Check that the error does not occur againEnd of diagnosisError U1711 is presentReplace the automatic transmission control unit and move on to Step 2    Op. 2135B52 ELECTRONIC AUTOMATIC TRANSMISSION ELECTRIC CIRCUIT -ECU MOUNT R R
2Correct operation checkALL OKPROBLEMS ENCOUNTEREDACTION
Check the fault has disappearedEnd of diagnosisThe fault persistsReplace the engine management control unit    Op. 1060G80 DIESEL ELECTRONIC INJECTION CONTROL UNIT - .R