| 1 | CHECK ON CORRECT ATTACHMENT OF BOWDEN CABLE | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the bowden cable is correctly attached or whether it is broken at the attachment device | Move on to Step 2 | Bowden cable disconnected from the housing (lever, device) or broken | Reposition bowden cable or replace it. |
| 2 | CHECK ON CONDITION OF GUIDE RELEASE | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the condition of the guide release ratchet mechanism at the connecting rod. | Move on to Step 3 | Plastic ratchet mechanism broken/distorted. | Replace guide release ratchet mechanism |
| 3 | CHECK ON GUIDE DEVICE | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the condition of the guide device. | Move on to Step 4 | Device on sliding guide broken/distorted. | Replace the sliding guides Op. 7045A66 SLIDING GUIDE (ONE),LEFT OR RIGHT FOR FRONT SEAT - R.R. |
| 4 | CHECK FOR PRESENCE OF FOREIGN BODIES BETWEEN GUIDE PROFILES | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that there are no foreign bodies between the guide profiles and/or in the guide control mechanism. | Move on to Step 5 | Presence of foreign bodies that adversely affect the operation of the system. | Remove the foreign bodies from the system. |
| 5 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | End of diagnosis | The fault persists | Replace the sliding guides Op. 7045A66 SLIDING GUIDE (ONE),LEFT OR RIGHT FOR FRONT SEAT - R.R. |
