5540BK CHECK THE CONTINUITY OF HTE LOW BEAM WIRING INSIDE THE HEADLAMP - Fiat - CROMA - eLearn

STEP	CHECK TO BE PERFORMED	RESOLUTION IF THE CHECK IS NOT OK
1	Disconnect the negative battery cable.Remove the Master/Slave headlamp Op. 5540B81 LEFT GAS DISCHARGE LIGHT CLUSTER - R.R. Op. 5540B82 RIGHT GAS DISCHARGE LIGHT CLUSTER - R.R.Connect the diagnostic tester in ohmmeter mode and check the continuity between Pin 1 of the 14-way connector and Pin 5 of the 21-way connector for connection to the ballast control unit	Replace the headlamp