194000256 - 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R    Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.    Op. 1084A16 OIL DIPSTICK PIPE - R.R    Op. 4450B04 RIGHT FRONT WHEEL - R.R    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.    Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 1092A10 CRANKSHAFT PULLEY - R + R    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT    Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R    Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R    Op. 1048B14 AIR DELIVERY HOSE BETWEEN TURBOCHARGER AND HEAT EXCHANGER - REPLACE    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION    Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED1. Undo the bolts (1a), then remove the crankshaft oil seal front cover (1b) complete with oil seal (1c).- Keep the gasket. - At the bench, release and remove the crankshaft front oil seal cover.

Take care not to damage the oil seal seal during its removal.The oil seal is destroyed during the removal operation.It must therefore always be replaced.

Refitting ( Removing ) - Place the gasket back in its housing.1. Place the crankshaft front oil seal cover (1a) in its housing and secure it tightening the new bolts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Crankshaft oil seal cover	Bolt (pretreated to be replaced)	M6	(engine crankcase side) 0.8 - 1.0	1.9 JTD 16v

2. Fit a new the crankshaft front cover oil seal (2a) in the housing using the tool (2b).

Tool	Description	Function	Validity
1871000500	Fitting tool	Fitting crankshaft front oil seal	1.9 JTD 8V1.9 JTD 16V

    Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION    Op. 1048B14 AIR DELIVERY HOSE BETWEEN TURBOCHARGER AND HEAT EXCHANGER - REPLACE    Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R    Op. 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R    Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT    Op. 1092A10 CRANKSHAFT PULLEY - R + R    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 4450B04 RIGHT FRONT WHEEL - R.R    Op. 1084A16 OIL DIPSTICK PIPE - R.R    Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.    Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 1016A10 SOUND-PROOFING COVER - R.R- Remove the vehicle from the lift.