1036B14 CAMSHAFT IN CYLINDER HEAD - R.R. WITH HEAD REMOVED - Fiat - CROMA - eLearn

194000171 - 1036B14 CAMSHAFT IN CYLINDER HEAD - R.R. WITH HEAD REMOVED

) 1. Place the tool in the vice.

	Description	Code
1	Support	1.820.012.000

2. Fit the tool.

	Description	Code
2	Support	1.820.258.000

3. Fit the tool.

	Description	Code
3	Spacer	1.820.267.000

4. Position the cylinder head (4a) on the support tools and fasten it using the nuts (4b).

1. Undo the bolts (1a) and remove the vacuum unit (1b) complete with O-ring (1c).

1. Undo the driven toothed pulley bolt (1a) using the tools (1b).

	Description	Code
1b	Counter-torque	1.822.146.000

	Description	Code
1b	Counter-torque	1.822.156.000

2. Remove the toothed driven pulley.

1. Undo the camshaft cap bolts.2. Remove the camshaft support lubrication pipe.3. Remove the camshaft caps.4. Remove the camshaft.5. Remove the camshaft front oil seal.

Refitting ( Removing

) Place the camshaft in its housing.Place the camshaft caps in their housings.Place the camshaft supports lubrication pipe in its housing.Tighten the camshaft cap bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS	M7	(Cylinder head side) 1.3 - 1.6

1. Fit the a new crankshaft front oil seal (1a) using the tool (1b).

	Description	Code
1b	Fitting tool	1.821.228.000

Place the toothed driven pulley in its housing.Tighten the toothed driven pulley bolt to the recommended torque using the tools.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	TIMING DRIVEN PULLEY	M12	(Cylinder head side) 10.8 -13.2

	Description	Code
-	Counter-torque	1.822.146.000

	Description	Code
-	Counter-torque	1.822.156.000

Place the vacuum unit in its housing with the O-ring and secure it by tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	VACUUM PUMP FOR BRAKES	M8	(Cylinder head side) 2.1 - 2.6

Remove the cylinder head from the support tools.Remove the cylinder head support tools from the vice and put them down.