194000174 - 1060E42 PRESSURE PUMP SUPPORT - DISMANTLING AND REASSEMBLY AT THE BENCH
Removing
(
Refitting
)
Position the pressure pump support in a vice fitted with protective jaws.1. Lock the rotation of the pressure pump drive pulley using two bolts.2. Undo the bolts (2a) and remove the safety flange (2b).3. Undo the pressure pump drive pulley nut.Undo the two bolts for locking the rotation of the pressure pump drive pulley fitted previously.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 1860954001 | Extractor | Pressure pump control pulley removal | 1.9 JTD 8V |
| Tool | Description | Function | Validity |
|---|---|---|---|
| 1860854002 | Extractor | Pressure pump control pulley removal | 1.9 JTD 8V |
Refitting
(
Removing
)
Fit the pressure pump on the support and fasten it using the nuts.Fit the pressure pump drive pulley.Lock the rotation of the pressure pump drive pulley using two bolts.Tighten the nut fixing the pressure pump drive pulley to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Pressure pump drive pulley | Nut | M14 | (pressure pump side) 4.5 - 5.5 | 1.9 JTD 16v1.9 JTD 8v |