194000236 - 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.- Position a hydraulic jack under the front suspension frame.1. Undo the bolts (1a), (1b) and the nut (1c) and remove the flexible mounting for the timing side power unit front support (1d). Refitting ( Removing ) 1. Place the timing power unit front support flexible mounting (1a) in its housing and secure it tightening the bolts (1b) and (1c) and the nut (1d) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit rigid support flexible mounting	Bolt	M10	(rigid support side) 5.0 - 6.0	1.82.21.9 JTD 16v1.9 JTD 8v

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit rigid support flexible mounting	Bolt	M10	(bodyshell side) 5.0 - 6.0

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit rigid support flexible mounting	Nut	M10	(bodyshell side) 5.0 - 6.0

- Remove the hydraulic jack from underneath the front suspension frame.     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.- Connect the negative battery terminal.