194000335 - 1060G20 ENGINE RPM SENSOR - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
DescriptionConnector
-Battery    See A001 BATTERY
    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.1. Disconnect the electrical connection from the engine rpm sensor.
DescriptionConnector
1Engine rpm sensor    See K046 RPM SENSOR
2. Undo the bolt (2a) and remove the rpm sensor (2b).
Refitting ( Removing ) 1. Position the engine rpm sensor (1a) in its housing and secure it tightening the bolt (1b) to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Rpm sensorBoltM6(engine crankcase side) 0.6 - 1.01.9 JTD 16v1.9 JTD 8v2.4 JTD 20v
2. Connect the electrical connection for the engine rpm sensor.
    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.- Connect the negative battery terminal.- Remove the vehicle from the lift.