194000514 - 3350E30 LATERAL ACCELERATION AND SLEWING SENSOR - R.R

Removing ( Refitting )     Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.(Both).    Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.    Op. 7040L28 TUNNEL SWITCH PANEL - R R    Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R    Op. 7040L20 TUNNEL COVER - R.R1. Undo the nuts (1a), disconnect the electrical connection (1b) and remove the lateral acceleration and slewing sensor (1c).

	Description	Connector
1b	Slewing control unit	See M091 SLEWING CONTROL UNIT

Refitting ( Removing ) - Connect the electrical connection to the lateral acceleration and slewing sensor, then place it back in its housing and secure it using the nuts.    Op. 7040L20 TUNNEL COVER - R.R    Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R    Op. 7040L28 TUNNEL SWITCH PANEL - R R    Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.(Both).