194000633 - 5040D77 AIR CONDITIONER MIXER FLAP CONTROL MOTOR - R R

Removing ( Refitting ) - Turn the ignition key to the OFF position and extract it.- Disconnect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

- Working from inside the vehicle, carry out the following operations:(Left side)    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 5010B24 UNDER-FACIA AIR DUCTS - R.R.1. Release the electrical connection (1a) for the mixture flap control motor (1b) and disconnect it.2. Release the flap operating lever carefully.3. Undo the two fixing bolts and remove the motor from the air conditioning casing.

	Description	Connector
1a	MIXTURE FLAP ACTUATOR	See N081 MIXTURE FLAP ACTUATOR

Refitting ( Removing ) - Check that the control motor for the air conditioning mixture flap is not damaged.- Place the air mixture flap control motor in position.- Tighten the two bolts fixing the air mixture flap control motor to the air conditioning casing and secure it.- Attach the flap operating lever carefully.- Connect the electrical connection to the mixture flap control motor.

	Description	Connector
	MIXTURE FLAP ACTUATOR	See N081 MIXTURE FLAP ACTUATOR

    Op. 5010B24 UNDER-FACIA AIR DUCTS - R.R.(Left side)    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.- Connect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

Carry out the actuator vane position self-learning procedure using the Examiner.

- Check that the air conditioning is working properly.