5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR - Fiat - CROMA - eLearn

194000652 - 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR

) - Turn the ignition key to the OFF position.- Open the bonnet.- Disconnect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

Op. 5050B32 WINDSCREEN WIPER ARM/S - R+R Op. 7210E22 R.R. WINDSCREEN BASE TRIM1. Working in the engine compartment at the base of the windscreen, undo the nuts (1a) and the bolt (1b) then detach the windscreen wiper control (1c) from the housing and rotate it to gain access to the electrical connection.

1. Release the electrical connection (1a) from the mounting and disconnect it from the motor, then remove the windscreen wiper control (1b) from the vehicle.

	Description	Connector
1a	WINDSCREEN WIPER MOTOR	See N015

Refitting ( Removing

) - Check that the windscreen wiper control is not damaged.- Connect the electrical connection to the motor.

	Description	Connector
	WINDSCREEN WIPER MOTOR	See N015

- Place the windscreen wiper assembly in position, screw in the fixing nuts and the bolt and tighten to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
WINDSCREEN WIPER ASSEMBLY ON BRACKET	Bolt	M6	0,8 ÷ 1,2

Op. 7210E22 R.R. WINDSCREEN BASE TRIM Op. 5050B32 WINDSCREEN WIPER ARM/S - R+R- Connect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

- Close the bonnet.- Check that the windscreen wiper assembly is working.