194000733 - 5540B24 MAIN BEAM BULB (ONE) FOR ONE HEADLAMP/LIGHT CLUSTER LH OR RH - R.R

Removing ( Refitting )     Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R1. Undo the protective cover in an anti-clockwise direction and remove it. 1. Release the retaining clip (1a), extract the bulb holder (1b) complete with bulb, then remove the bulb (1c).

If the bulb is working properly, avoid touching it with your hands. If this does happen, clean the bulb with alcohol.

Refitting ( Removing )

Avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.

- Check the condition of the bulb and make sure it is clean; if necessary, replace it with a new one.- Fit the bulb in the bulb holder.1. Fit the bulb holder correctly in its housing. - Attach the retaining clip.- Position the protective cover rotating it in a clockwise direction.- Check that the bulb is working.    Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R